Mudelismifoorum

1. Futuba S9254 Digital Servo (uus pakendis) poes 1400.-
Ball Bearings:
Steel gear:
Torque 4,8 V: 74 Ncm
Holding torque 4,8 V: 185 Ncm
Speed 4,8 V/degree: 0,1 Sek/45 Grad
Torque 6 V: 92 Ncm
Holding torque 6 V: 230Ncm
Speed 6 V/degree: 0,08 Sek/45Grad
Weight: 56 g
LxWxH: 40 x 20 x 33,6 mm
Operating voltage: 4,8 - 6 Volt

Annan ära 900.-EEK

2. Futaba S3110 (uus pakendis) poes 270.- (osutus mulle liiga väikseks)
Dimensions: 21.8 x 11.0 x 19.8mm. Speed (4.8v): 0.10 sec/60deg. Torque (4.8v): 1.6kg/cm. Weight: 7.7g
annan ära 200.-

Mõlemad ostetud sealt (üks tuli Gyroga kaasa) :
http://www.modelhelicopters.co.uk/acata ... utaba.html


3. JR/Graupner C577 poes 215.- (Graupner/JR raadioga kaasa tulnud servo)
Operating voltage 4,8 ... 6 V
No-load current approx. 5 mA
Current drain max. approx. 820 mA
Torque approx. 35 Ncm Holding power approx. 2 x 45° Transit speed approx. 0,125 s/40°
Weight approx. 42g
Dimensions (L x l x h), approx. 38 x 19 x 37 mm
annan ära 150.-
https://shop.graupner.de/webuerp/servlet/AI?ARTN=4101


Mujale Eestisse saan cargoga saata.