M: 5010 360KV / 750KV

[tankister]

Müün 4 5010 750KV , üks mootor pealmine osa võlli otsas loperdab , ei tea mis lahti aga ilmselt annab parandada , kuni 20 korda õhus olnud , selle raha lendab küll.
20 eur+ saatmine




Müün 4 5010 360KV lendanud kuni 10 korda

Selle hinna eest on mootorit küll.

20 eur+saatmine



,,,,,,,,,,,,,,,,,,,,,,



5010 360KV / 750KV High Torque Brushless Motors For MultiCopter / QuadCopter / Multi-axis aircraft

These are really great outrunners. We've tested this line and they work extremely well.



Features:
1.Machined aluminum front housing with four fan-style cooling holes that pump air through the motor while it runs.






2.Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.






3.Specially designed NdFeB magnets with high temperature rating for trouble-free operation.






4.High Temperature 140 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor.






5.High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plate id used on this motor 5010.




6.High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.






7.High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .


Motor size: 50*10mm






Shaft size: 4mm

Weight: 80g



KV(rpm/v): -750KV


Battery: 2-6s Li-Po

ESC: 20-40A
Best working with props of 14-16"


https://ae01.alicdn.com/kf/HTB1f9DHJFXX ... XFXXXM.jpg

[tankister]

http://static2.nagi.ee/i/p/1010/63/2526 ... ed_m.jpg/1

http://static2.nagi.ee/i/p/1010/63/25265785f205ff_l.jpg

propelleri hoidjaid ilmselt pole . propellerid otse peale , kui vaja leiab ka propid.