Labad 700 kopterile

Ehitusnipid, materjalid, joonised, konstruktsioon...
Post Reply
User avatar
Riff
Posts: 1439
Joined: Mon May 03, 2010 10:12
Location: Rakvere

Labad 700 kopterile

Post by Riff »

Hinnavahe on üle 2x, võrreldes HK labade hinda Radix omadeg, on kellelgi kogemusi?

HK
Spec:
TIG 690mm Z-Weave
Length: 690mm
Width: 59mm
Thickness: 8mm
Weight: 189g each

http://www.hobbyking.com/hobbyking/stor ... duct=10418

Radix
Technical Information:
Weights
185g and 175g
Blade Specs
Length bolt hole to tip: 710mm
Weight: 185g or 175g

Root Details
Root: 12mm
Washers included for: 14mm, 16mm, 18mm
Bolt Hole: 5mm
Sleeve inclued for: 4mm bolt

http://www.curtisyoungblood.com/products_view.php?id=1
T-Rex 600 EFL DFC 3GX HV; T-Rex 600N DFC 3GX OS55 LimitedEdition HV; HK250GT - DFC 3gx savöx jne :) ; RF 5,5G; DX9; RoboCat 280 (Holybro F7, Tekko32, Atlata2 HV, Monster 2 jne )
Top
User avatar
titan
Posts: 981
Joined: Fri May 15, 2009 17:10
Contact:
Contact titan

Post by titan »

Seda hinnavahet tunned, kui lendad erinevate labadega :wink:
Raptor X50/Airwolf/Mi-24 Hint/Agusta 109/AH-1 Cobra/T-28 Trojan
don`t fly faste then yours angel can fly!
Top
User avatar
Riff
Posts: 1439
Joined: Mon May 03, 2010 10:12
Location: Rakvere

Post by Riff »

Selleks hetkeks on ju mingi valik tehtud juba ja raha välja käidud :?
T-Rex 600 EFL DFC 3GX HV; T-Rex 600N DFC 3GX OS55 LimitedEdition HV; HK250GT - DFC 3gx savöx jne :) ; RF 5,5G; DX9; RoboCat 280 (Holybro F7, Tekko32, Atlata2 HV, Monster 2 jne )
Top
Post Reply

Return to “Ehitus ja konstruktsioon”